Skip to content

Sample Images and Data

Real photos and report files from the acceptance runs. The originals are in Documentation/samples/ in the repository (see its README).

Up camera (part on the nozzle)

Good 0603 on the nozzle PASS: 0603 seen from below, size and angle measured
0603 on its side REJECT: picked on its side (wrong size) -> reject bin
Upside-down 0603 REJECT: resistor upside down (dark top facing the camera)
Empty nozzle EMPTY: bare tip, nothing picked -> feed and try again

Down camera (board)

Placed 0603 check-board: PLACED, offset measured
Empty footprint check-board: MISSING (bare green pads)
Dry run with stale alignment dry run: crosshair = target. Here the board had moved since alignment - re-align

Contact sheets

Up-camera sheet, run b76c1d40

Board check sheet 677e8924

Report files

Documentation/samples/report/ holds summary.txt, cycles.csv and placement_review.csv from these runs. What each column means: After the Job.