Skip to content

Specifications

Machine

V3
Motion CoreXY (Voron-inspired), sensorless homing, refined by visual homing on a datum dot
Travel X 0 - 235 mm, Y 0 - 343 mm, Z 0 - 51 mm
Limits Klipper max 600 mm/s and 7500 mm/s²; jobs run at 400 mm/s and 5000 mm/s²; Z capped at 50 mm/s
Repeatability about 0.01 mm measured with the down camera
Nozzle one nozzle, Samsung CP40 tips (N08 for 0603/0805)
Rotation NEMA 11, 360 °/s, 3000 °/s²
Parts tested 0603 resistors (acceptance), 0805 resistors (place tests)
Feeders 8 mm paper tape, servo-driven; 1 working (F1)
Host Raspberry Pi 4, 1 GB, MainsailOS
Controller BTT Octopus Pro (STM32H723), TMC5160 drivers; Arduino Uno as second Klipper MCU
Interface 7" touchscreen (KlipperScreen), Mainsail in a browser
Identification OSHE logo and open-source hardware logo on the machine; project and files at oshe.io and GitHub
Job input KiCad .kicad_pcb -> pnpslice -> .job.json, loaded over the network or from SD card / USB stick

Ongoing

Machine footprint, maximum PCB size and power supply rating are still to be measured and added.

Performance (acceptance runs, 2026-11-18)

Requirement Target Result
Throughput 500 parts/hour 491 / 519 / 499 / 527 CPH (average ~511)
Picks from tape 95 % 97.9 % (92/94)
Vision pass/fail correct 95 % 100 % of 193 up-camera and 138 board-check decisions
Placement error - mean 0.075 - 0.094 mm, worst 0.229 mm
Operation without a laptop yes job loaded from SD/USB and run from the touchscreen

Details: Results.