3. Touchscreen¶
The 7" touchscreen runs KlipperScreen. Everything needed to run the machine is under the Pick & Place menu - no laptop needed.
Pick & Place menu¶
| Button | What it does |
|---|---|
| Job | the PnP Job page (below) |
| EMERGENCY STOP | stops everything at once (see Safety) |
| Vision home | homes X/Y, then re-zeros on datum dot 0 with the down camera |
| Calibration check | check-machine (nozzle empty) |
| Lights > | up light, down light on/off |
| Reject bin > | go to the bin, teach it, back to default |
The Job page¶
Job list. One row per job file. At the top: a one-line machine status (homed? last result?) and Load jobs from SD card / USB stick (how). While a job runs, a Running: ... button takes you back to its status.
Job details. Tap a job: board and side, parts to place, packages, which feeder holds each package, the last run's result and parts per hour, and an estimate. Three options:
| Option | Default | Meaning |
|---|---|---|
| No feeders | off | you put each part in the pocket by hand when asked |
| Align first | on | the camera finds the board again before placing |
| Dry run | off | no parts: the down camera visits every placement and saves a photo |
Start asks for confirmation, then switches to the status view.
Status (while a job runs). A red JOB RUNNING: the machine moves on its own. Hands clear. line, then: homing state, job, part n / total and reference, placed / failed, elapsed time, the latest status line. Buttons:
- Continue: answers the open question (same as the dialog's button).
- Stop job: tap twice; the job ends after the current part.
- EMERGENCY STOP: one tap, stops everything now.
Questions from the job (for example "load a part in the pocket") open as dialogs over any page.