Skip to content

4. Reject Bin and Feeders

Reject bin

The bin's default position comes from where it is bolted on the plate (config.toml [layout]). Check it once:

python -m pnpvision teach-bin --goto       # nozzle goes over the bin at safe Z

If the opening is elsewhere, jog the nozzle over it and run teach-bin (or tap Reject bin -> Teach on the touchscreen). teach-bin --default forgets a taught position.

Feeders

Each feeder needs its pick spot taught once: see Teaching a Feeder. After that the pick position refines itself from the up camera as parts are picked.