1. Print the Parts
Print everything in CAD/V3-Active/. Start with the frame and motion parts: they take longest.
All files are STEP; open them in your slicer (or any CAD program) and export what it needs.
Print settings
Setting
Value
Material
PETG for structural parts and motor/idler mounts; PLA is fine for enclosures and light parts
Layer height
0.2 mm
Walls
2 or more
Infill
12 % gyroid
Supports
tree supports, only where the part needs them
Nozzle
0.4 mm
Parts by folder
Parts named A and B are mirror images: print one of each (for example one motor corner
for each back corner).
Framing
Folder / file
Qty
Notes
Framing/Frame Leg Bottom A, Bottom B
per leg
legs, mirror pair
Framing/Frame Leg Middle, Frame Leg Spacer
per leg
Framing/Framing 4040 Spacer, ... Spacer Logo
one with the OSHE logo for the front
Framing/TOP motor A and B
1 set each
Top Motor Frame, Upper Motor mount, Lower Motor mount: the two back corners with the motors
Framing/TOP idler A and B
1 set each
Upper Idler, Lower Idler, Top Tensioner Mount, Tensioner: the two front corners
X axis
File
Notes
X-Axis/UpperA, UpperB, LowerA, LowerB
X carriage parts, mirror pairs
X-Axis/RailSpacer
Staging plate
Folder / file
Notes
Staging/Plate/Four Quarters/Tile LL, LR, UL, UR
the plate in four printable quarters, or
Staging/Plate/Two Halves/Tiling Staging Plate Model + ... Model Camera
the plate in two halves (for a large printer); the "Camera" half has the up-camera opening
Staging/Plate/Acrylic/Acrylic Panel (+ Acrylic 2D.dxf for laser cutting)
acrylic panel, cut instead of printed
Staging/Plate/OPTIONAL Spacers
only if your plate needs raising
Staging/Brackets/PlateBracket, Double M3 Bracket 20mm
hold the plate on the frame
Staging/Mounts/PCB Mount Static, PCB Mount Dynamic
one each: fixed and adjustable board mounts
Staging/Mounts/CameraDatum.3mf
multi-color datum, or the CameraDatum NO AMS parts (MainBody, 4mmGrid, Dot) printed separately
Staging/Mounts/Up Camera Mount/CameraMount, LightPlate, LightDiffuser
up camera and its LED ring under the plate
Feeders
Folder
Notes
Feeder/Tape Alignment/LeftEndV2, RightEndV2, RibV4
tape guide parts, one set per feeder
Feeder/Manual Feeder/ManualFeederLeftV2, RightV2
a hand-loaded track (no servo)
Electrical
Folder
Notes
Electrical/HMI/Frame, Arm, FrameEnd
touchscreen mount
Ongoing: still being added
Toolhead (CAD/V3-Active/Toolhead/): the LumenPnP-based head as built
Modified 0816 feeder (CAD/V3-Active/Feeder/0816 Feeder/): the servo feeder body
Electrical mounting brackets (CAD/V3-Active/Electrical/Electrical Mounts/)
Complete assembly (PnP_Full_Assembly_V3.step)
Per-part quantities, and native CAD files (Fusion 360 / SolidWorks / Onshape)
The camera datum must be flat and crisp
The cameras use the datum's white dots as their reference. Print it slowly with a fresh, flat
first layer, and don't sand the dots.