Lighting¶
| Light | LEDs | Pin | Macros | Used for |
|---|---|---|---|---|
| Toolhead status | LED 1 of neopixel leds |
Octopus PB10 | LEDS_IDLE, LEDS_BUSY, LEDS_ERROR, LEDS_RAINBOW, LEDS_OFF |
status |
| Down light | LEDs 2 - 3 of neopixel leds |
Octopus PB10 | VISION_LIGHT_ON / _OFF / _TOGGLE |
down camera (on at boot) |
| Up-camera ring | 6 x WS2812 up_light |
Uno D11 | UP_LIGHT_ON, UP_LIGHT_OFF, UP_LIGHT_RAINBOW |
up camera |
| Frame strip | 44 x WS2812 frame |
Uno D10 | FRAME_ON, FRAME_OFF, FRAME_RAINBOW |
room light, kept dim |
Effects come from the klipper-led_effect extension (LEDS.cfg).
Lights change what the cameras see
- The frame strip at 50 % washed out the up camera's view of the nozzle bore; it runs at 15 %.
- pnpvision sets the up ring with
SET_LED. An activeled_effecton the same LEDs overrides it: if up-camera images look odd, check no effect is running onup_light. - Keep the up ring on during jobs (
keep_on = true): switching it makes the camera re-adjust. - A flickering (purple) down light means noise on the LED data line: see the wiring tips in Electronics.